Customization: | Available |
---|---|
CAS No.: | 9003-01-4 |
Formula: | CH2=CH-Cooh |
Still deciding? Get samples of US$ 1.00/liters
Order Sample
|
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment Methods: |
|
---|---|
Support payments in USD |
Secure payments: | Every payment you make at Made-in-china.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Color | Color chart and customized |
Mixing Ratio | 1k autobase color:thinner=1:1;
2k autocryl color:hardener:thinner=2:1:(0.2-0.6)
|
Application | Automotive refinish paint and car paint |
Feature | Weathering resistant, good coverage and high solid |
Shelf Life | 3 years in original sealer can in cool and dry place at 20ºC |
Product introduction |
||
Multi-purpose nitrocellulose single group grey primer. To fill the marks or minor indentations left by the grinding of sandpaper,And provides simple isolation, is a kind of general economic type primer. |
||
Product characteristics |
|
|
Economy, can reduce cost. |
|
|
The paint film is exquisite, filling ability is good. |
|
|
Single unit, easy to construct. |
|
|
Fast drying and easy to polish. |
|
|
Physical parameters |
|
|
Appearance status |
Grey thick liquid |
|
Nonvolatile component |
54±3% |
|
gloss |
matte |
|
specific gravity |
About 1.2±0.1kg/L |
|
viscosity |
5:1 Acetic acid butyl ester100±10S(-4 cups,25ºC) |
|
auxiliary product |
|
|
thinner |
Universal thinner |
|
Construction parameters |
|
|
Mix proportion |
Gray primer volume 1 |
|
Universal thinner volume 1~1.5 |
|
|
mix before use |
|
|
Spraying viscosity |
18~22 seconds(-4cups,25ºC)) |
|
Spraying tool |
Upper pot spray gun diameter of 1.4~1.6mm |
|
The lower pot nozzle diameter is 1.6~1.8mm |
|
|
Spraying pressure |
Gun pressure for 3~5kg/cm |
|
Spraying method |
Spraying layer, each layer of evaporation time for 5 ~ 10 minutes (25 ºC),If the plastic parts are repaired, thin the first layer and give a longer evaporation |
|
Film thickness |
20~30 micron |
|
drying time |
Can be polished:30 minutes(25ºC),10 minutes(60ºC) |
|
Dry consolidation |
400#~600# sandpaper to Dry grinding or 800#~1000# sandpaper to water grinding |
|
Nonapplicable range |
Does not apply to stainless steel, aluminum, zinc, iron, wood and other surfaces |
|
considerations |
1.Recommended for local repair, not recommended for large area construction; |
|
2.If high adhesion and strong corrosion resistance are to be obtained, it is recommended to apply a dual-component paint. |
|
|
3.It is not recommended to use diluents with high moisture content and too fast drying. |
|
|
Packing specification |
|
|
1L*12, 4L*4 |
|
|
storage |
|
|
The storage period of the open tank is 2 years |